Introduction¶

CircuitPython driver for M5Stack PbHub

Dependencies¶

This driver depends on:

Please ensure all dependencies are available on the CircuitPython filesystem. This is easily achieved by downloading the Adafruit library and driver bundle or individual libraries can be installed using circup.

Installing from PyPI¶

Note

This library is not available on PyPI yet. Install documentation is included as a standard element. Stay tuned for PyPI availability!

Installing to a Connected CircuitPython Device with Circup¶

Make sure that you have circup installed in your Python environment. Install it with the following command if necessary:

pip3 install circup

With circup installed and your CircuitPython device connected use the following command to install:

circup install m5stack_pbhub

Or the following command to update an existing version:

circup update

Usage Example¶

# Configure channel 1 io pin 1 as a digital input and read the value
import board
import m5stack_pbhub

hub = m5stack_pbhub.PbHub(board.I2C())
din = m5stack_pbhub.PbHubDigitalInput(hub, channel = 1, io = 1)
print(f"Digitial input value: {din.value}")

Documentation¶

API documentation for this library can be found on Read the Docs.

For information on building library documentation, please check out this guide.

Contributing¶

Contributions are welcome! Please read our Code of Conduct before contributing to help this project stay welcoming.

Table of Contents¶

Examples

Simple test